Multi-language menu screen support, voice operation instructions and alarm SMS configuration.
The GSM network automatically synchronizes to ensure accurate clocks, adjust time zones, and facilitate multi-zone use.
Double Protection Manipulation Special Design
The main system (including WiFi) is the most important part of the room,
and it is recommended that the user protect it with a PIR sensor.
In addition, when someone tries to disassemble or destroy the system,
the system also issues a loud alarm that protects all of your property in a variety of ways.
When the infrared detector / door sensor is activated, it will send the signal to the system panel.
The alarm system will alarm and send a text message / calling to the pre-set phone number,
and you will be notified the first time.
Support 100 remote controls, wireless sensors, RFID and detectors to learn storage locations
APP Remote Operation
Remote control system through mobile app, you can controll the home situation wherever you are
More Intimate Reminder
Support external power supply,
when the external power supply fails or power failure, APP push, SMS reminder, call APP push,
Power-off start backup battery power supply,
host built-in battery power shortage or low-voltage SMS reminder and APP push.
5 Zone Type Settings
Ordinary defense zone, home defense zone, 24H emergency zone, closed zone, doorbell zone
One-click set timing arming/disarming, eliminating the trouble of manual control and enjoying smart life
Users can set delay arming /delay alarming according to owner needs.
Defense Zone Location Setting
Support multiple name settings such as main door, lobby,
bedroom, balcony, perimeter, smoke, gas, CO, water leakage, etc.
5 sets of Phone Numbers
Dial switch and SMS switch can be set separately
Work with the camera, in the event of an emergency,
you can remotely monitor for the first time, monitor the shouting thief at any time.
Input Voltage :DC 5V
Operation current :Screen off<120mA,Screen on<200mA
Siren output :<500mA
Wifi System:IEEE802.11b/g/n wireless standard.
Spare battery :3.7v/500mAh Li-battery
Relative Humidity :<80%(no condensation)
Door magnetic installation: the door magnet is glued to the door or window with double-sided tape,
and the alignment mark is aligned. The installation pitch is less than 1cm.Infrared Installation:
Infrared is installed at a height of 1.8-2.2 meters from the ground.
It is fixed on the wall with screws and adjust the gimbal to the right angle.